Time Attack Series - Official Forum :: View topic - John Begley, Taisan GTR #59

Time Attack Series - Official Forum http://www.timeattack.co.uk/forum/

John Begley, Taisan GTR #59 http://www.timeattack.co.uk/forum/viewtopic.php?f=9&t=110	Page 1 of 9

Author:	Smokey 1 [ Thu May 08, 2008 10:56 am ]
Post subject:	John Begley, Taisan GTR #59
Well after a brilliant time at Donington despite a few little issues, I have been busy pestering Mr Barnes for a place in the remaining rounds. Thanks again Rob The Taisan is a R32 GTR that we bought of Mr Tim Skyline Webster late last year and a few weeks after I had my first track day at Brands Hatch becoming instantly hooked. The car was running a standard Nur engine with air filters and a Mines exhaust system. Chassis wise there had been a set of tein coil overs and a roll cage fitted. Braking was taken care of by a set of Stoptechs. We headed to Brands again in February but the day ended short after loosing oil pressure After stripping the engine down and seeing the damage (well and truly FUBAR) we re bored the block and fitted a Tomie 2.8 stroker kit and also replaced the N1 turbos with a set of secondhand 25/30's a decision that I am now regretting after one of them letting go A new set of 2860-10's are being fitted tonight. Big thanks to myself for managing not to brake anything whilst stripping the old turbos off This weekend I will be fitting some adjustable arms to the front of the car and next week should have it set up to be corner weighted. One thing I did notice at Donnington was the level of Driver skill out on track, so I am sure this year will be a massive learning cure for me Enough chit-chat 7 am at the hotel car park before the opening round New turbos, big thanks to Turbo Dynamics Ikeya Formula arms awaiting fitting Thats all for now folks, I have a little vid from Donny I will post up later John

Author:	Steven [ Thu May 08, 2008 11:18 am ]
Post subject:	Re: John Begley, Taisan GTR #59
Quality parking in the first shot John Does this mean you are now attending the rest of the rounds or just the odd one or two?

Author:	Smokey 1 [ Thu May 08, 2008 11:34 am ]
Post subject:	Re: John Begley, Taisan GTR #59
Steven wrote: Quality parking in the first shot John Does this mean you are now attending the rest of the rounds or just the odd one or two? Wont be at Knockhill Steven but will look forwards to pushing you off the track at the rest of them, seems only right I return the favour John

Author:	Steven [ Thu May 08, 2008 12:43 pm ]
Post subject:	Re: John Begley, Taisan GTR #59
LOL

Author:	damo_s13 [ Thu May 08, 2008 8:58 pm ]
Post subject:	Re: John Begley, Taisan GTR #59
that spaire car park space top of your picture about the snow is where my missis had her mr2 parked.

Author:	Smokey 1 [ Mon May 12, 2008 1:20 pm ]
Post subject:	Re: John Begley, Taisan GTR #59
Finished fitting the new turbos this weekend, different drive from the HKS 25/30's they come on boost about 500 rpm later but pull hard all the way to the limiter which has now been reduced to 7500rpm. I also fitted a front mount inter cooler to help keep intake temps down as the stock item was starting to fall to bits I am hoping to fit the front arms this week and get the geometry set up before the car gets corner weighted, has anyone else corner weighted there car? and was there a difference in overall handling? John

Author:	Listerofsmeg [ Tue May 13, 2008 7:34 pm ]
Post subject:	Re: John Begley, Taisan GTR #59
what turbos are they john? 2540s? or bigger?

Author:	Smokey 1 [ Tue May 13, 2008 8:29 pm ]
Post subject:	Re: John Begley, Taisan GTR #59
Listerofsmeg wrote: what turbos are they john? 2540s? or bigger? They are 2680-10's, I got a cracking deal from Turbo Dynamics. Not too far away from the 25/30's spool up a little later but pull all the way to the limiter Have you managed to get your car up and running yet Neil ? John

Author:	Listerofsmeg [ Tue May 13, 2008 9:13 pm ]
Post subject:	Re: John Begley, Taisan GTR #59
you can ask rob that..... would be interested to see the graph with those on they sound fairly similar to the 2540s, maybe spool a little better due to newer design though, where is full boost made? and what sort of cams have you got in there? hopefully we will get to blast down the start finish straight at the same time to see whats what think i need to use one of those grinders you were using on your manifolds to do mine.....yours were miles better than my effort!!!

Author:	Smokey 1 [ Fri May 16, 2008 6:51 am ]
Post subject:	Re: John Begley, Taisan GTR #59
Yeah Rob has the two graphs laid over each other from the 25/30's and the -10's, will post them up when I get them off him. As for a blast down the straights, looking forwards to it, hope you get it all back together soon mate. John

Page 1 of 9	All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/